|
#1
September 1st, 2006, 02:36 AM
|
|||
|
|||
|
Router/hub problems
Alright, Im running my internet into a Netgear WGR614 54mbs wireless and the computers directly connected to the router work. When I run it upstairs into a Netgear EN104 hub, the lights goes amber and no internet can be reached through the hub. Any ideas?
|
|
#2
September 1st, 2006, 04:33 PM
|
||||
|
||||
|
Do you get amber lights if you use one of the other cables which are currently being used for the pc's downstairs?
|
|
#3
September 1st, 2006, 06:29 PM
|
|||
|
|||
|
ya, all the cat5s and rj45s are good we have switched them around...
|
|
#4
September 1st, 2006, 08:04 PM
|
||||
|
||||
|
Make sure that the connection between the router and the hub is in the uplink port and that the setting for the port is uplink.
__________________
NETWORKING FORUM: If you haven't already done so, please goto this topic and post the requested information. And yes, it is all relavent. "Yea though I walk through the valley of the shadow of death... I will fear no evil." -Psalms 23 K8N Diamond Plus (BIOS v1.2) AMD Athlon 64 X2 4400+ Antec TruControl 550W NVidia GeForce 7900GT (NGO v1.8466 BETA) OCZ Platinum 2x1GB (2-3-2-5) SATA: 2xWD740 PATA: 2xWD2500, WD1200, NEC DVD/RW
|
|
#5
September 2nd, 2006, 05:24 AM
|
|||
|
|||
|
As far as i know it is... The router doesnt have an uplink port so i've told them to put it in the first one. The hub however does have an uplink port which is also #1 and the hub is set to uplink.
|
 |
| Bookmarks |
«
Previous Topic
|
Next Topic
»
| Topic Tools | |
|
|
All times are GMT +1. The time now is 11:52 AM.
[
RSS ]
