musicguy
November 14th, 2001, 09:40 PM
Hi all,
My name is Ryan,and I can kill Bill Gates and the whole MS staff.
Heres why,starting from the beginning,
reciently I got a cable internet connection,but didnt have a lan card,
so bought a lan card and got the connection from the hub,
so far so good,attached it,pinged it and it worked,heres the problem,
when I try to ping outside it gives me "request timed out" but when
I check it says connected to the net for blah blah minutes....
changed computers and the cable works...with the same tcp/ip connections.
I dont know if I should install drivers or what...
in the start-settings->NETWORK applet this is what it looks like
ms client
dial up adapter
ethernet card adapter
->tcp/ip dial up
->tcp/ip ethernet card
ms family login
if it helps the tcp/ip of the ethernet card settings are
if i ping it works so its not the card problem but if i ping it does not.....
The above settings are working fine for all the other computers
WITH THE SAME CABLE but if I take the cable and but it on my computer...
it does not work...PLEASE HELP
write any suggestions to ryan@jumac.com
Thank you.
[ 14 November 2001: Message edited by: Dodge ]
My name is Ryan,and I can kill Bill Gates and the whole MS staff.
Heres why,starting from the beginning,
reciently I got a cable internet connection,but didnt have a lan card,
so bought a lan card and got the connection from the hub,
so far so good,attached it,pinged it and it worked,heres the problem,
when I try to ping outside it gives me "request timed out" but when
I check it says connected to the net for blah blah minutes....
changed computers and the cable works...with the same tcp/ip connections.
I dont know if I should install drivers or what...
in the start-settings->NETWORK applet this is what it looks like
ms client
dial up adapter
ethernet card adapter
->tcp/ip dial up
->tcp/ip ethernet card
ms family login
if it helps the tcp/ip of the ethernet card settings are
if i ping it works so its not the card problem but if i ping it does not.....
The above settings are working fine for all the other computers
WITH THE SAME CABLE but if I take the cable and but it on my computer...
it does not work...PLEASE HELP
write any suggestions to ryan@jumac.com
Thank you.
[ 14 November 2001: Message edited by: Dodge ]