|
#1
January 29th, 2001, 08:00 PM
|
|||
|
|||
|
1782 Hard Disk Controller Failure - POST-
I have a COMPAQ DeskPRO 6000 EN series 6266 computer. When I BOOT I get a POST error 1782 Hard Disk Controller Failure. This of course will not allow it to Boot. If I get a UDMA/66/100 Disk Controller Card will this alleviate my problem. Any feedback would be appreciated, especially from another person that has a COMPAQ DeskPRO 6000 EN.
|
|
#3
July 9th, 2005, 01:26 AM
|
|||
|
|||
|
1782 - Disk Controller Failure
I have a compact armada m700 notebook. When i turn it on it indicates error 1782 - Disk Controller Failure. So i have another hard drive i installed it but, when i was in the middle of the windows xp installation, it went off. So when i turned it back on i got the 1782 disk error again. I donīt know what to do.
I will apreciate any help. Thanks |
|
#4
October 9th, 2005, 07:12 PM
|
|||
|
|||
|
i had the same problem but was able to get it to install, seems i acidentally changed position of the jumpthingy when i made a back up of the HD on another system and changed it to slave position, i didnt put jumpthingy back in the right place
hope this works for you! |
|
#5
October 9th, 2005, 07:37 PM
|
||||
|
||||
|
Hi benjamin25 welcome to CyberTechHelp.
You will have to start your own thread (question). You find the appropriate forum and use the New Thread button. This is birdlinski's thread and birdlinski's question. Asking questions in another members thread detracts attention away from birdlinski and their issues. birdlinski , you have posted two different threads with the same question, this thread and this other one here ---> http://www.cybertechhelp.com/forums/...ead.php?t=4155 Since your being helped there I am closing this thread. |
 |
| Bookmarks |
«
Previous Topic
|
Next Topic
»
| Topic Tools | |
|
|
All times are GMT +1. The time now is 02:22 PM.
