Cyber Tech Help Support Forums

Cyber Tech Help Support Forums (https://www.cybertechhelp.com/forums/index.php)
-   Windows 98 (https://www.cybertechhelp.com/forums/forumdisplay.php?f=12)
-   -   missing files after windows 98 SE installation (https://www.cybertechhelp.com/forums/showthread.php?t=167535)

eillouz October 19th, 2007 11:13 AM

missing files after windows 98 SE installation
 
Hey

I'm getting an error that he is missing vnetsup.vxd, then vredir.vxd, and then dfs.vxd.

After i press enter three times windows will start up. I get another error saying something about a dynamic link.

Unable to load the dynamic link library:
Msnp32.dll.

The system cannot find the file specified:
Microsoft Network

Anyway i have try to install a PCMCIA network card, with the driver on a cd, he asks for the cd win98 second edition. But when i insert it, he doesn't find the files on it. And this is why he causes the error because i don't finish the complete installation of the network card. But the card is working after this, but i do get the errors.

Also when i try to make a bootdisk, he asks for the win98 se cd, but he doesn't find the files either. I have tried almost everything and i really need help.

Murf October 19th, 2007 02:18 PM

Welocme to CTH


1. Click Start, point to Settings, and then click Control Panel
2. In Control Panel, double-click Network
3. In the Network dialog box, select Client for Microsoft Networks and then click Remove
4. In the Network dialog box, click OK, and then click Yes to restart your computer
5. Repeat steps 1 and 2
6. In the Network dialog box, click Add.
7. In the Select Network Component Type dialog box, click Client then Add
8. In the Select Network Client dialog box, click Microsoft under Manufacturers
9.Under Network Clients, select Client for Microsoft Networks and then click OK.
10.In the Network dialog box, click OK.Click Yes to restart your computer

eillouz October 19th, 2007 09:22 PM

i have a problem here
 
hii

after step 9 it ask me to select device
and then all the problem continue itself:
when i press "Have Disk..."
and i click on browse and choose the driver its dosent give me the driver
=
blank list

so i click on cancel
and then in the network i click ok
and then it said that its isnt finish and if i want to continue
i click yes
and then it ask me to insert the windows 98 cd-rom and click ok
^ so i do
and then it search for these files in the disk (and it cant found them) :
choosusr.dll
shcpcsvc.dll
icmp.dll
inetmib1.dll
ipcfgdll.dll
iphlpapi.dll
msab32.dll
msafd.dll
msnet32.dll
msnp32.dll
mspp32.dll
mswsock.dll
mswsosp.dll
networks - this is not mistake, there is no dll
pmsql.dll
protocol - no dll
Qosname.dll
Rapilib.dll
rnr20.dll
Routetab.dll
rpcltc1.dll
rpcltc3.dll
rpclts3.dll
Rsvpsp.dll
secur32.dll
services - no dll
snmpapi.dll
svrapi.dll
vdhcp.386
vip.386
vlb32.dll
vnbt.386
vtcp.386
vtdi.386
vudp.386
winpopup.cnt
ws2_32.dll
ws2help.dll
ws2thk.dll
wscthunk.dll
arp.exe
ftp.exe
hosts.sam
ipconfig.exe
lmhosts.sam
lmscript.exe
lmscript.pif
locproxy.exe
locprxy2.exe

and i have no power to continue the list//

help me here!!

we talk here about motorola modem SB4200 with USB Connection

i consider to reformat the system and install again

Murf October 20th, 2007 05:13 AM

Go to START then to RUN

Type in

sfc hit<OK> may ask for 98 cd..

This will repair your system files.

eillouz October 20th, 2007 05:02 PM

its finish the process and the problem continues

can i get a guide to format the hard drive and install again windows?

eillouz October 22nd, 2007 09:00 PM

Sloved
 
-- SLOVED --

after reformat with ms-dos 3.5" disk this time
the system goes fine

Murf October 23rd, 2007 01:27 AM

Thanks for letting us know.


All times are GMT +1. The time now is 09:38 AM.

Copyright © Cyber Tech Help. All rights reserved. All other trademarks are the property of their respective owners.