Go Back   Cyber Tech Help Support Forums > Hardware > Hardware

Notices

Closed Topic
 
Topic Tools
  #196  
Old April 3rd, 2011, 06:07 AM
Murf's Avatar
Murf Murf is offline
Moderator
 
Join Date: Oct 2001
O/S: Windows 10 Home
Location: Newport News VA
Age: 74
Posts: 17,107
blaze1514 you came to CTH for help, members telling you to email them or call them and they will help is not in this forums policy. You can do what you want, but if you post the requested info here it will be deleted. Spammers browse these forums for email addy's..

(0xf7a57524, 0xc0000034, 0x00000000, 0x00000000) does it give you any more info after the....


  #197  
Old April 6th, 2011, 03:33 PM
Xtremenginer Xtremenginer is offline
New Member
 
Join Date: Apr 2011
Posts: 1
Smile

Quote:
Originally Posted by thegladi8tor View Post
I had the same problem with a Dell Optiplex 330. I received the
STOP 0x0000007B(0xF78DA63C,0x0000034,0X x0000000,0x0000000 error message if I booted with Windows XP. I resolved the issue by the following actions

1. On start up (Dell logo), press F2 to enter BIOS

2. Expand the "Drives" section

3. Go to "SATA Operation"

4. Change this from "RAID Auto/AHCI" to "RAID Auto/ATA"



I thank u from d bottom of my heart for helping me fix d blue screen of death that had been appearing very frustatingly whenever I tried to install Xp.Now that d problem is solved I went through d troubles of registering in d forum just to convey my words of appreciation to u.
3 cheers for thegladi8tor,Hip Hip Hurray
  #198  
Old April 18th, 2011, 08:02 PM
herculesx herculesx is offline
New Member
 
Join Date: Apr 2011
Posts: 1
BSD Stop Error 0x0000007B (0xF78D2524)

Stop 0x0000007B (INACCESSIBLE_BOOT_DEVICE)
Stop 0x000000ED (UNMOUNTABLE_BOOT_VOLUME)
These two errors have similar causes and the same troubleshooting steps apply to both of them. These stop codes always occur during the startup process. When you encounter one of these stop codes, the following has happened:
#1. The system has completed the Power-On Self-Test (POST).
#2. The system has loaded NTLDR and transferred control of the startup process to NTOSKRNL (the kernel).

#3. NTOSKRNL is confused. Either it cannot find the rest of itself, or it cannot read the file system at the location it believes it is stored.
When troubleshooting this error, your task is to find out why the Windows kernel is confused and fix the cause of the confusion.
Things to check:

The SATA controller configuration in BIOS. Re Boot and Press F-2 or F-12 or Delete or whichever keys your system uses to enter Setup (Bios). Once in Bios (setup) Scroll or Tab down to the Drives Section and then check Raid Configuration and make sure the correct option is set. This error: Stop "0x0000007B" happens 95% of the time because the wrong option is Set. If the SATA controller gets toggled from ATA to AHCI mode then Windows will not be able to talk to the SATA controller because the different modes require different drivers. Try toggling the SATA controller mode in the BIOS.
You may receive this error if you've been experimenting with the RAID controller settings. Try changing the RAID settings back to Auto detect or ATA (usually accurate) instead of AHCI which is the main cause of this error.
Also this Error may be caused by Improper or poorly seated cabling, although not likely it is always something to check if all else fails. Reseating the data cables that connect the drive and its controller at both ends.
Hard drive failure Run the built-in diagnostics on the hard drive. Remember: Code 7 signifies correctable data corruption, not disk failure.
File system corruption Launch the recovery console from the Windows installation disc and run chkdsk /f /r.
Improperly configured BOOT.INI (Windows XP). If you have inadvertently erased or tinkered with the boot.ini file, you may receive stop code 0x7B during the startup process. Launch the recovery console from the Windows installation disc and run BOOTCFG /REBUILD
  #199  
Old May 4th, 2011, 09:52 PM
jbrandon jbrandon is offline
New Member
 
Join Date: May 2011
Posts: 1
Mucho Thanks !!!!

Thanks so much for the your support gladiator you are a rock star !!! saved me tons of time
  #200  
Old May 25th, 2011, 08:11 AM
kavin kavin is offline
New Member
 
Join Date: May 2011
Posts: 1
Quote:
Originally Posted by thegladi8tor View Post
I had the same problem with a Dell Optiplex 330. I received the
STOP 0x0000007B(0xF78DA63C,0x0000034,0X x0000000,0x0000000 error message if I booted with Windows XP. I resolved the issue by the following actions

1. On start up (Dell logo), press F2 to enter BIOS

2. Expand the "Drives" section

3. Go to "SATA Operation"

4. Change this from "RAID Auto/AHCI" to "RAID Auto/ATA"
like so many on this thread, your post has resolved my installation problem, which I was stuck with for a few days now. I have registered on this forum just to sincerely thank you for your inputs.

Gladiator is the MAN !!! :-)

I also wanted to ask... After I complete the installation and start using Windows XP should I turn back the SATA Operation to AHCI ? do let me know ...
  #201  
Old May 25th, 2011, 10:02 PM
javigh123 javigh123 is offline
New Member
 
Join Date: May 2011
Posts: 1
Thumbs up

thank you very much thegladi8tor, I was trying to go back from a Windows 7 Home to XP Pro on a Lenovo ThinkPad Edge 14 0578-A25 and was getting the blue screen stop error. I just went into the BIOS and changed the hard drive setting to "Compatible" (that was the only other option other than ACHI) and it worked!

Great job!
  #202  
Old May 27th, 2011, 12:44 AM
etek etek is offline
New Member
 
Join Date: May 2011
Posts: 2
I just wanted to say thanks. I googled the problem, found your solution and was on my way. I am sure you saved me a lot of time trouble shooting.
My machine has Win7. I am tired of navigating around Win7 and all the extra junk with my factory install and wanted the simplicity of a generic copy of XP so I slapped in a new hard drive and I am installing XP now. Thanks again for posting.
  #203  
Old May 27th, 2011, 12:46 AM
etek etek is offline
New Member
 
Join Date: May 2011
Posts: 2
I was doing the same thing and thegladi8tor saved me a bunch of time. I spent more time trying to get in the bios with my lenovo. I did the exact thing and now installing XP..
  #204  
Old June 7th, 2011, 08:02 PM
Tarkin6 Tarkin6 is offline
New Member
 
Join Date: Jun 2011
Posts: 1
Thank you so much!!

I am so glad I found this answer!! saved me a lot of formating!!
Keep up the great work!
  #205  
Old June 14th, 2011, 01:05 AM
run49 run49 is offline
New Member
 
Join Date: Jun 2011
Posts: 1
I have a Dell XPS 410 and am getting the same error. I was attempting a clean install of my harddrive and this error came up after running the reinstall disk.

I tried changing my SATA operation from "RAID on" to "RAID Autodetect / ATA" like it says above and this did not fix the problem.

Any further ideas on what to do?

Thanks in advance
  #206  
Old June 16th, 2011, 11:57 AM
j0-sh j0-sh is offline
New Member
 
Join Date: Jun 2011
Posts: 1
Quote:
Originally Posted by thegladi8tor View Post
I had the same problem with a Dell Optiplex 330. I received the
STOP 0x0000007B(0xF78DA63C,0x0000034,0X x0000000,0x0000000 error message if I booted with Windows XP. I resolved the issue by the following actions

1. On start up (Dell logo), press F2 to enter BIOS

2. Expand the "Drives" section

3. Go to "SATA Operation"

4. Change this from "RAID Auto/AHCI" to "RAID Auto/ATA"

I, like many others just registered to say thank you so much for that. I was having a huge problem with my Intel D510MO Atom motherboard. First blue screen was because it needed Windows XP Pro SP2 and not Windows XP Pro. Second blue screen was because of the incorrect setting in BIOS as mentioned above.

Thanks again!
Josh
  #207  
Old June 17th, 2011, 09:22 AM
St0ff St0ff is offline
New Member
 
Join Date: Jun 2011
Posts: 1
Quote:
Originally Posted by thegladi8tor View Post
I had the same problem with a Dell Optiplex 330. I received the
STOP 0x0000007B(0xF78DA63C,0x0000034,0X x0000000,0x0000000 error message if I booted with Windows XP. I resolved the issue by the following actions

1. On start up (Dell logo), press F2 to enter BIOS

2. Expand the "Drives" section

3. Go to "SATA Operation"

4. Change this from "RAID Auto/AHCI" to "RAID Auto/ATA"


Thanks so much for this advise, I've been struggling for ages trying to fix a Toshiba NB100 with this exact problem which started after running a BIOS upgrade. Kinda overlooked this small problem as I figured that the upgrade wouldn't have made this change. Anyway, I really appreciate it.
  #208  
Old June 22nd, 2011, 06:05 PM
kmoeller6667 kmoeller6667 is offline
New Member
 
Join Date: Jun 2011
Posts: 1
Smile

OUTSTANDING! The fix in rom-bios for the bsod of 070000007B worked like a charm and saved me many hours of fustration. Thanks.

Last edited by kmoeller6667; June 22nd, 2011 at 06:10 PM.
  #209  
Old June 23rd, 2011, 04:57 AM
Murf's Avatar
Murf Murf is offline
Moderator
 
Join Date: Oct 2001
O/S: Windows 10 Home
Location: Newport News VA
Age: 74
Posts: 17,107
Closing this thread but leaving it, as it is no longer serving a purpose for leaving open.
Closed Topic

Bookmarks

Topic Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT +1. The time now is 12:28 PM.