It doesnt do anymore after the black screen??
I know when I load safe mode it takes alot longer than loading reg windows....
Hmmmmmmmm .. I dont know why booting to BIOS and setting it back to default wouldnt correct things.......
Try this>
http://www.partitionwizard.com/disk-...pool-data.html
Quote:
Fix Boot Issue
You can also use a bootable USB drive to fix the boot issues with CMD. If you have made a bootable USB drive with MiniTool Partition Wizard Pro Ultimate, you can use the bootable USB drive directly. The Command Prompt section can be found in the MiniTool PE loader interface.
If not, you need to create a Windows installation USB drive which is very simple. Let’s see detailed steps.
Step 1. Create installation media with a USB flash drive or a DVD via the Windows 10 Media Creation Tool, which can be downloaded on a normal computer with Internet connection.
Step 2. Enter the BIOS setting to set the CD/DVD bootable disc or USB flash drive as the first boot device. Then boot from the installation media.
Step 3. Select your language preferences, and click on Next button to continue.
Step 4. Then choose Repair your computer on the bottom left corner.
Step 5. Choose Troubleshoot to go on.
Step 6. At the Advanced options page, choose Command Prompt.
Step 7. Type bootrec.exe/fix boot and hit Enter.
Then restart your PC and check if verifying DMI pool data gets fixed
|
I hope this works!!