View Single Post
  #2  
Old July 13th, 2003, 12:06 AM
dohray's Avatar
dohray dohray is offline
CTH Subscriber
 
Join Date: Apr 2003
O/S: Windows 7 64-bit
Location: Cardiff, Wales
Age: 60
Posts: 1,469
Hi CPUGEEK,

Thing's do not sound promising. It's a possibility that your mobo's been damaged, possibly your CPU also. Can you see scorch marks on your mobo and especially on your RAM slots?
Another member here (cody) posted an excellent guide to building your 'puter. It's good and I copied and saved it. Although, as he said, it is a long-winded way but the most fool-proof. You could run through it.

Codys guide;

1 Nothing but the power supply, CPU,installed on the motherboard, plug your power cord in and turn power on.
2 You should hear a series of long beeps & all your fans should be turning.
3 The board is looking for memory.
4 That tells you your 'board, CPU & power supply are working.
5 Unplug power cord (very important an ATX power supply always has power to it when the cord is pluged in).
6 Install 1 stick of RAM in the first bank, it should be marked either 0 or 1
7 Plug your power cord in and turn your power on.
8 You should get 1 long and 3 short beeps. It will be looking for the video card.
9 That tells you your PS/'board/CPU/RAM are working.
10 Unplug power cord.
11 Install your video card and plug your monitor into your video card.
12 Plug your power cord in turn your power on.
13 You should get a power up test which is 1 short beep.
14 You should see your CPU/RAM/video reconized on the screen.
15 You will get a disk boot failure because you have no drives installed. In this case every thing you have installed is working.
16 Shut machine down and unplug power cord.
17 Install all your drives, set your BIOS up and install your operating system.

Best of luck but I'm hoping you only have to replace the mobo and PSU.
Reply With Quote